Last year I went a little nutty making Valentine's Day "envelopes" out of felt for the kids in my son's preschool class. Ok, there were only six kids, total, but still it was probably a little overboard for four year olds. I saw a few ideas on Pinterest and went with two. I did envelopes for the boys and hearts for the girls. Luckily there were three of each. I already had the felt, velcro and thread, so they didn't cost me anything, but if you buy felt, be sure to buy the cheapest stuff out there (craft felt). Usually you can get it on sale for around $2.50 a yard. If you have the felt rectangles, you could use those too, just make them a little smaller than I did.
Supplies
Red and White Craft Felt
Red Thread
Pinking Shears
Velcro Strips
Pins
Sewing Machine
Scissors
Being as they were for kids and I knew they would probably get thrown away right after Valentine's Day , I wasn't worried about them being perfect. So the sewing and cutting could have been better. Somehow I didn't think I would get critiqued from a four year old.
I started with the envelopes first and cut two pieces out of the white felt. And a felt red heart. The big piece is approximately 12" wide by 15" high. The smaller piece is about 12" wide by 8.5" high. On the inside of the smaller piece I used a large bowl to cut out a half circle. You could leave it straight across if you want. I wanted the half circle, so you could kind of see what was inside. Then I sewed a zigzag stitch from the corners of the smaller piece towards the top middle section about a half inch shy of the top to represent the where the pieces are glued together. Then I hand stitched the velcro on. I only had light brown velcro, so that's what I used. If I were to buy some, I would buy white. After that, I pinned the two pieces together to form an envelope and zigzagged around the whole thing using about a 1/2" seam. I used my pinking shears and went around the whole thing. Then I stitched the heart on the opening of the envelope and I was done.
Next up was the heart. I used a piece of paper to use as a template for the heart since I wanted them all to be about the same size. I cut out a white heart and then cut out a red heart using a slightly smaller template. Once I was done cutting out all of the red hearts, I cut the template in half width-wise a little bigger at the bottom than at the top. I measured how wide the heart was and cut a strip of white felt about an inch wide. I sewed the white strip to the top of the half heart. Then willy nilly cut a scallop design. Like I said, these were for kids, who were probably going to trash them, so they didn't need to be perfect. Next up was sewing the hearts together. Pin all the heart pieces together and sew around the outside. You're almost done. All you have to do now is cut the scallop edge around the outside. I think that took the longest of anything. Next time I would probably use my pinking shears.
The kids seemed to like them, especially the girls.
Happy Valentine's Day.
No comments:
Post a Comment